| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| OO Dimensions ? http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=7673 |
Page 1 of 1 |
| Author: | hogan [ Mon Jul 24, 2006 11:04 am ] |
| Post subject: | |
Hello everyone  . I was wondering if somone could tell me the best dimensions for an OO guitar. Are the sides tapered? I have nothing to go by, except what you folks tell me and pictures  . Is there a place on the web where I can get basic dimensions for the various guitar sizes?
All input is greatly apreciated  .
Jeff |
|
| Author: | RussellR [ Mon Jul 24, 2006 11:48 am ] |
| Post subject: | |
Hi Jeff For all the dimensions of the current Martin Line go here Martin Dimensions |
|
| Author: | tippie53 [ Tue Jul 25, 2006 4:04 am ] |
| Post subject: | |
The 00 will come in 12 or 14 fret. Also you can do deep body. The sides are actually a compund curve that will form out to a radius of about 15 foot on the back. The top should be striaght till the back is praboliced then the top should have the radius put in. this helps to set the neck angle that is most critical to a great playing guitar. john hall |
|
| Author: | hogan [ Tue Jul 25, 2006 10:58 am ] |
| Post subject: | |
Thanks guys. I apreciate the help. Jeff |
|
| Author: | Howard Klepper [ Tue Jul 25, 2006 1:16 pm ] |
| Post subject: | |
What is prabolicing? |
|
| Author: | Serge Poirier [ Tue Jul 25, 2006 3:37 pm ] |
| Post subject: | |
It's icing on prabolas me thinks! 
|
|
| Author: | MSpencer [ Thu Jul 27, 2006 3:52 pm ] |
| Post subject: | |
It comes in either Vanilla, Chocolate or Strawberry. Prabolas very tasty! Mike White Oak, Texas |
|
| Author: | Serge Poirier [ Thu Jul 27, 2006 4:45 pm ] |
| Post subject: | |
Never saw any hurds of that! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|